Location
Sesame Solar, Inc., Falahee Road, Jackson, MI 49203, USA
What was installed?
One Indoor HydroCab® PowerCore V2.1 incl. Enapter Electrolyser, fuel cell, Enapter dryer & water storage
Where was it installed?
Sesame Solar, Inc., Falahee Road, Jackson, MI 49203, USA
Green Hydrogen Production with Sesame Solar’s Nanogrids:
Hydrogen gas is produced inside Sesame Solars Nanogrids using electrolyzers, which decompose water into hydrogen and oxygen gases. The hydrogen is “green” because it is made using solar power. The green hydrogen gas is stored in solid state storage tanks on the outside of the Nanogrid at low pressure (less than 300 psi) making it safe to transport. The oxygen gas is safely vented. When the batteries are discharged to 35%, the onboard Hydrogen Fuel cell starts charging the batteries using the stored, green hydrogen gas. When the batteries are recharged, the Hydrogen Fuel cell shuts off. Electrolysis continues to produce hydrogen gas until the storage tanks are full, then it shuts off and the batteries are again charged using solar power. This system provides a clean energy loop.
Components
Enapter AEM Electrolyser EL 4
High efficiency Electrolyser with low requirements for input water purity. The Modules can be easily integrated in 19“ racks and have low maintenance requirements. As many modules as needed are addable to a scalable and modular System.
Hydro Fuel Cell
Our fuel cells from Intelligent Energy can be integrated into our modular and individual configurable H2 Core systems, complementing the systems immensely, because the hydrogen produced can be easily and reliably converted back into electricity. The fuel cells are available in the different power levels 1.2 kW, 2.4 kW and 4.0 kW.
Enapter Water Tank Module (WTM) 2.1
The water tank is rack mountable into a standard 19” cabinet. It is able to supply 11 AEM electrolysers with clean water,
Enapter Dryer
The dryer is maintenance- free. During operation, one cartridge catches the humidity from the hydrogen gas stream of the electrolyser, while the other cartridge is heated and regenerated. The dryer is rack- mountable in a standard 19” cabinet.
Did this pique your interest?
Send us a message if you would like to make an enquiry, and we’ll get back to you as soon as possible.