Unsere modularen Systeme werden weltweit in allen denkbaren Anwendungen für grünen Wasserstoff eingesetzt.
Stöbern Sie in unserer Sammlung, erfahren Sie mehr und senden Sie uns eine E-Mail, wenn Sie Fragen haben.
HydroCab® PowerCoreSelbstaufladende Brennstoffzelle
Indoor HydroCab®Für den Innenbereich
Outdoor HydroCab®Für den Außenbereich
Enapter AEM Nexus™ 1000Megawatt scale
Enapter AEM Nexus™ 500Megawatt scale
Enapter AEM Flex™ 120The electrolyser fitting your production needs
WPSWasseraufbereitungssystem
Enapter AEM Electrolyser EL 4Enapters AEM Electrolyser EL 4.0
Hydro Fuel CellPower for H2
Enapter DryerZusätzlicher Trockner für höhere Ausgangsreinheit
Hydro HulcGaskompressionssystem
Enapter WTMWater Tank Module 2.1
LagerungDie perfekte Lösung zur Speicherung von H2
H-PortGreen hydrogen for vehiclesHydroCab® PowerCoreSelbstaufladende BrennstoffzelleIndoor HydroCab®Für den InnenbereichOutdoor HydroCab®Für den AußenbereichEnapter AEM Nexus™ 1000Megawatt scaleEnapter AEM Nexus™ 500Megawatt scaleEnapter AEM Flex™ 120The electrolyser fitting your production needsWPSWasseraufbereitungssystemEnapter AEM Electrolyser EL 4Enapters AEM Electrolyser EL 4.0Hydro Fuel CellPower for H2Enapter DryerZusätzlicher Trockner für höhere AusgangsreinheitHydro HulcGaskompressionssystemEnapter WTMWater Tank Module 2.1LagerungDie perfekte Lösung zur Speicherung von H2H-PortGreen hydrogen for vehicles
Unsere modularen Systeme werden weltweit in allen denkbaren Anwendungen für grünen Wasserstoff eingesetzt.
Stöbern Sie in unserer Sammlung, erfahren Sie mehr und senden Sie uns eine E-Mail, wenn Sie Fragen haben.
Hydrogen Fuel will be used to help creating a grid-balancing and train-recharging application. A lot of components had to work together – production, storage, compression and re-use of hydrogen for electrical power was all part of the process.
Hydrogen will be used to produce synthetic fuels like jet fuel for aviation.
EGAT Learning Center was established with the aim of providing knowledge and experience in power generation. To become a Trust & Pride of the nation, as well as a source of energy learning in Thailand and the world from the past, present and future.
Enapter’s AEM Electrolysers helps to achieve grid stability, assisting in the prevention of major power outages and grid damage.
JA-Gastechnology GmbH (JAG) has developed a multi-function hydrogen refueling system that draws on stacked Enapter AEM Electrolysers to unlock hydrogen mobility solutions.
A project by JA-Gastechnology GmbH (JAG).
The 100 inhabitants of the Malaysian mountainside village of ‘Orang Asli’, close to the town of Tapah, had been completely off-grid until 2019, relying solely on candles and kerosene for lighting.
The Phi Suea House (Home of the Butterflies) is the world’s first solar-hydrogen multi-house which has been off-grid since 2015. It demonstrates to the world how sustainable living can be achieved.
Solenium won an international tender from COPEL. COPEL would like to do some investigation on blending hydrogen into their gas pipelines.
Use of the electrolysis system in a biogas plant for enriching biogas with hydrogen.
A pilot plant for the production of alternative fuels based on biomethane in which hydrogen is converted with carbon dioxide to methane in a methanation reactor. The hydrogen required for this is produced in an electrolyser and is to be temporarily stored in a Type IV hydrogen tank as a buffer.
HydroCab® Power Core installed for a single house, completely supplied with solar and hydrogen for electricity (fuel cell) and heating (combustion).
We installed an Electrolysis system (2x Indoor HydroCab®), buffer tank, HULC compressor, high-pressure gas bottle bundles, fuel cell, battery, AC/DC converter.
This Brazilian green H2 project aims to support decarbonizing the Amazon where the use of dirty diesel predominates.
To achieve this we installed 3 Outdoor HydroCabs® V2.1 incl. Enapter Electrolyser, Enapter dryer, Enapter water storage, water purification, fuel cells, compressor system, Enapter EMS, H2 storage (including commissioning)
3 Indoor HydroCabs® were installed to kickstart the hydrogen production. Enapter electrolysers, compression and storage were delivered by H2 Core Systems GmbH.
Installed an Indoor HydroCab® PowerCore incl. Enapter Electrolyser to support the Nanogrid.