Indoor & Outdoor Hydrocab –
Green hydrogen for heating

Do you want to convert surplus electricity, from a wind or PV plant into green hydrogen for heating?

We have customized solutions based Indoor or Outdoor HydroCab with optional compressors and storage.

Shown here is our Indoor HydroCab, a plug and play solution for small and medium sized H2 demands. It integrates up to five Enapter Electrolysers 4.0, no dryer is included in this configuration as most burners only require 99.9 % purity.

Each Enapter Electrolyser 4.0 is capable of producing up to 0.5 Nm³/h. The output volume of each Electrolyser can be set between 60 % and 100 %. The Indoor HydroCab combines up to 5 modules to a single plug and play cabinet.

The configuration shown uses Liquid Cooled Electrolysers which can be used for combined heat solutions.

A Water Tank Module can be installed which stores 38 l of deionized water. The WTM takes the space of one electrolyser and is needed when no direct water supply can be provided.

The solution is available in indoor and outdoor cabinets.

The system comes with a cloud based management system, and can be controlled from your laptop or phone

Do you need a bigger system? No problem, the system is scalable, ask us for a customized solution. 

Downloads

Specifications

IP rating:

IP20 indoor cabinet

Cabinet outside dimensions:

W × D × H in mm = 800 × 1000 × 1900

Available size inside:

38 U

Cabinet weight (empty):

180 kg to up to 520kg when fully loaded

Cooling:

Airflow for stack cooling is blown for each module
individually from front to back. Optional water cooling available.

Location of connections and piping:

All piping and electrical connections are located in the front of the machine. Power, water and hydrogen connections are located at the bottom of the back of the cabine.

Filters:

No filters needed.

Ambient operative temperature range:

5  – 40 °C

Ambient operative humidity range:

20 – 95 %, non-condensing

H2 Production rate:

300 Nl/h to 2.500 Nl/h

Water consumption:

of 0.4 to 2 l/h DI water

The table represents the specifications of a standard cabinet.

Components

Enapter AEM Electrolyser EL 4

High efficiency Electrolyser with low requirements for input water purity. The Modules can be easily integrated in 19“ racks and have low maintenance requirements. As many modules as needed are addable to a scalable and modular System.

Extendables

This product can be extended with the following modules

Energy Management System (EMS)

Energy Management System:

Enapter’s unique Energy Management System (EMS) allows for intuitive monitoring and control of the electrolysers and dryers, as well as easy integration with third-party devices (ie. fuel cells, sensors, tanks, solar, wind, etc.).

The EMS takes energy system control software to a whole new level.

You can have a closer look at Enapters EMS-Page.

Included in Use Case

Request for a quote

Send us a short message, if you are interested in this packacke and we’ll get back to you as soon as possible.