Outdoor HydroCab – Green Hydrogen for District Heating
Do you need green hydrogen to power district heating?
Shown here is a typical solution for a customer requiring 99.9% purity H2, in an outdoor cabinet, which uses surplus PV electricity to generate H2, for later use in a district heating system.
This solution shown uses a high-quality 19″ cabinet system includes a heating, and ventilation system, with five Electrolysers.
The hydrogen production can be specified from 1 kg/24h hydrogen up to 5 kg/24h hydrogen per cabinet.
Other installation modules, such as a water purification system, compressors, a water tank module and fuel cells with different power levels, are also available for the H2 Core System.
The system comes with a cloud based management system, and can be controlled from your laptop, mobile app, via the main panel, Modbus or via external PLC.
Do you need a bigger system? No problem, the system is scalable, ask us for a customized solution.
Specifications
IP rating:
IP54
Cabinet outside dimensions:
W x D x H: 910 x 1210 x 2200 mm
Available size inside:
42 U
System weight:
400 kg – 600 kg
Cooling:
Air cooled (liquid cooled version available soon)
Location of connections and piping:
All connections are located either in the back of the cabinet or through the bottom of the cabinet. The O2 out line is located on the top backside.
Ambient operative temperature range:
– 25 °C … + 40 °C
H2 Production rate:
up to 5 kg per day / 2,5Nm³ per hour
Water consumption:
0,4 l/h … 2 l/h
Operative power consumption:
up to 16 kW
Output pressure:
35 bar
The table represents the specifications of a standard cabinet.
Components
Extendables
This product can be extended with the following modules
Included in Use Case
Request for a quote
Send us a short message, if you are interested in this packacke and we’ll get back to you as soon as possible.
